company news about Snow melting agent granulator solves winter road problems

With the arrival of winter, the problem of road icing is becoming increasingly apparent. In order to ensure driving safety, deicing agents are widely used. Then, how to save time and effort to produce high-quality deicing agent particles has become a widely concerned issue.

Snow melting agent granulator

The deicing agent granulator, also known as the roller extrusion granulator, adopts a dry granulation process. The extrusion force between the rollers is used to press the raw materials into particles to form a granular product of the desired shape and size.

Industrial salt has been widely used in deicing agents, and its effectiveness and environmental protection have been recognized by everyone. However, when traditional industrial salt is spread on the road, there are problems such as uneven particle size and fast weathering speed, which limits the snow melting effect. With the introduction of the roller extrusion granulator, these problems have been effectively solved.

The industrial salt deicing agent granulator can accurately extrude and granulate it to make it a uniform and stable granular deicing agent. After this granular deicing agent is spread on the road, it can cover the surface of ice and snow more evenly, improve the speed and effect of snow melting, and ensure the safety and smoothness of road traffic.

In addition, the industrial salt deicing agent granulator also has the advantages of high production efficiency and easy operation. Its environmentally friendly and energy-saving granulation process also meets the sustainable development requirements of modern industry.

Snow melting agent granulator working process

The snow-melting agent roller extrusion granulator usually consists of a feeding device and two parallel and relatively rotating rollers. The powder is continuously and evenly added from the hopper to the top of the two rollers. Under the action of the continuous rotation of the extrusion rollers, the powder is squeezed into granular sheets. Then it falls to the bottom of the granulator and is broken into separate granular materials by the shaping wheel with teeth and claws, and discharged from the discharge port.

The shape and size of the snow-melting agent particles can be changed by adjusting the granulator parameters and replacing the rollers.