Horizontal Centrifugal New Type Organic Fertilizer Granulator Granulation Equipment

Horizontal centrifugal granulation equipment for Fertilizer Pellets supplier

Product Details

Since the production of biological fertilizers is based on organic matter, the cellulose is high, the forming conditions are poor, and the living bacteria with the function of fertilizer are added, the production process is not suitable for high temperature exposure. Disc granulation, extrusion and new granulation methods are adopted in the material preparation method. Because these three processes require high pulverization of raw materials and high granulation water content, the general water content should reach about 30%. The water content is low, the drying load is small, the loss of effective bacteria can be reduced, the dust is small, and the operating environment is better. The raw materials enter the granulator, add appropriate amount of water or steam, and bond them into granules. After granulation, the materials are sent to the dryer through the belt conveyor for drying. The particle diameter is 3.0-4.0mm, and the granulation rate is greater than 70%.

The new type of organic fertilizer granulator, also known as the stirring tooth granulator, is a new type of granulation equipment of our company. It is used to granulate various organic substances after fermentation, breaking through the conventional organic fertilizer granulation process. The raw materials are dried and crushed, and spherical particles can be processed by direct ingredients, which can save a lot of energy. The produced particles are spherical and have high organic content, which can realize organic granulation. Utilizing the feature that organic particles can be embedded in each other for a long time under the action of centrifugal force, no binder is needed when granulating. The granules are solid and can be screened after granulation, reducing drying energy consumption. The organic matter after fermentation does not need to be dried, and the moisture content of the raw material can be about 20%-40%.

Specifications